Emerson DIXELL XR30T, Инструкции по установке и эксплуатации

Страница: 29 / 40

1592040000 XR30-60-70T EN v1.3 2020.08.26 XR30-60-70T 29/40
inP did
Digital input 1 alarm delay (base time
depends on par. ibt)
0 Pr1 sec 0 to 255 min/sec
inP i2P Digital input 2 polarity CL Pr1 OP(0); CL(1)
inP i2F Digital input 2 configuration EAL Pr1
nu(0); dor(1); dEF(2); AUS(3);
ES(4); EAL(5); bAL(6); PAL (7);
FAn(8); HdF(9); onF(10); LiG(11);
CC(12); EMt(13)
inP d2d
Digital input 2 alarm delay (base time
depends on par. ibt)
0 Pr1 sec 0 to 255 min/sec
inP nPS
Number of external pressure switch alarms
before stopping the regulation
0 Pr2 0 to 15
inP odC
Compressor and fan status after door
opening
no Pr2 no(0); FAn(1); CPr(2); F-C(3)
inP rrd Regulation restart after door alarm no Pr2 n(0); Y(1)
inP CLi Light output activation from door input no Pr2 n(0); Y(1)
inP LCi
Time with light output forced ON
(0=function disabled)
0 Pr2 0 to 255 min
inP n01
Number of motion detections before
activating light output (valid if ixF=EMt)
0 Pr2 0 to 10
inP t01
Ti
me with light output forced ON after
motion detection
0 Pr2 0 to 255 min
ES ErA Energy saving algorithm nu Pr2 nu(0); bAS(1)
ES HES
Energy saving mode temperature
differential
0 Pr1 °F
[-30°C to 30°C]
[-54°F to 54°F]
ES LdE
Energy saving controls the lights (lights
OFF when energy saving mode is active)
no Pr1 n(0); Y(1)
ES StE
Period to switch from normal mode to
energy saving mode
00:00 Pr1 hh:mm 0 to 23h50min; nu
ES EtS
Period to switch from energy saving mode
to normal mode
00:00 Pr1 hh:mm 0 to 23h50min; nu
ES dS
Door opening time to switch from EtS to
StE
0 Pr1 sec 0 to 999 sec
ES nES
Number of motion detections before
disabling energy saving mode (valid if
ixF=EMt)
0 Pr1 0 to 255
Cnt n1H
Number of activations for relay output oA1
(thousands of)
Pr1 read only
Cnt n1L
Number of activations for relay output oA1
(units of)
Pr1 read only
Cnt n2H
Number of activations for relay output oA2
(thousands of)
Pr1 read only
Cnt n2L
Number of activations for relay output oA2
(units of)
Pr1 read only
Cnt n3H
Number of activations for relay output oA3
(thousands of)
Pr1 read only
Cnt n3L
Number of activations for relay output oA3
(units of)
Pr1 read only
Cnt n4H
Number of activations for relay output oA4
(thousands of)
Pr1 read only
Cnt n4L
Number of activations for relay output oA4
(units of)
Pr1 read only
Cnt n5H
Number of total activations of digital input 1
(thousand of)
Pr1 read only
Cnt n5L
Number of total activations of digital input 1
(units of)
Pr1 read only
Cnt n6H
Number of total activations of digital input 2
(thousand of)
Pr1 read only
Cnt n6L
Number of total activations of digital input 2
(units of)
Pr1 read only
Cnt F1H
Number of working hours for relay output
oA1 (thousands of)
Pr1 hours read only
Cnt F1L
Number of working hours for relay output
oA1 (units of)
Pr1 hours read only