Emerson DIXELL XR30T, Инструкции по установке и эксплуатации

Страница: 27 / 40

1592040000 XR30-60-70T EN v1.3 2020.08.26 XR30-60-70T 27/40
dEF MdF Maximum length of defrost cycle 20 Pr2 min 0 to 255 min
dEF dSd Start defrost delay 0 Pr2 sec 0 to 255 sec
dEF StC
Compressor stop before starting any
defrost
0 Pr2 sec 0 to 255 sec
dEF dFd Displaying during defrost dEF Pr2 rt(0); it(1); SEt(2); dEF(3); Coo(4)
dEF dAd
Temperature display delay after any
defrost cycle
0 Pr2 min 0 to 255 min
dEF Fdt Draining time 1 Pr2 min 0 to 255 min
dEF Hon
Drain heater enabled after draining time
(par. Fdt)
2 Pr2 min 0 to 255 min
dEF dPo Defrost cycle enebled at stat-up no Pr2 n(0); Y(1)
dEF od1
Automatic defrost (at the beginning of any
energy saving mode)
no Pr2 n(0); Y(1)
dEF od2
Optimized defrost
no Pr2 n(0); Y(1)
dEF dSt
Temperature sampling time during an
optimized defrost (valid only if od2=yes)
30 Pr2 sec 1 to 255 sec
dEF SYd
Type of synchronized defrost
nU Pr2 nu(0); SYn(1); nSY(2)
dEF dt1
Differential temperature for latent heating
control
0.1 Pr2 °C 0.1 to 1.0°C
dEF ErS
Restart regulation after dripping time, when
defrost Syd = nSY
no Pr2 n(0); Y(1)
FAn FAP Probe selection for evaporator fan P2 Pr2 nP(0); P1(1); P2(2); P3(3); P4(4)
FAn FSt Evaporator fan stop temperature 50.0 Pr2 °F
[-50.0°C to 50.0°C]
[-58.0°F to 122.0°F]
FAn HYF Evaporator fan regulator differential 4.0 Pr2 °F
[0.1°C to 25.0 °C]
[0.1°F to 45.0°F]
FAn FnC Evaporator fan operating mode C-n Pr2 C-n(0); O-n(1); C-Y(2); O-Y(3)
FAn Fnd Evaporator fan delay after defrost cycle 1 Pr2 min 0 to 255 min
FAn FCt
Differential temperature for cyclic activation
of evaporator fans (o=disabled)
0 Pr2 °F
[0°C to 50°C]
[0°F to 90°F]
FAn FSU Evaporator fan operating mode Std Pr2 Std(0); FoF(1); Fon(2)
FAn Ft Evaporator fan controlled during defrost no Pr2 n(0); Y(1)
FAn Fon
Evaporator fan ON time in normal mode
(with compressor OFF)
5 Pr2 min 0 to 255 min
FAn FoF
Evaporator fan OFF time in normal mode
(with compressor OFF)
10 Pr2 min 0 to 255 min
FAn Fo1
Evaporator fan ON time in energy saving
mode (with compressor OFF)
5 Pr2 min 0 to 255 min
FAn FF1
Evaporator fan OFF time in energy saving
mode (with compressor OFF)
10 Pr2 min 0 to 255 min
FAn Fd1 Evaporator fan delay 0 Pr2 sec 0 to 255 sec
FAn Fd2 Evaporator fan delay after closing door 0 Pr2 sec 0 to 255 sec
FAn FAC Probe selection for condenser fan P3 Pr2 nP(0); P1(1); P2(2); P3(3); P4(4)
FAn St2 Set Point 2 regulation (for condenser fan) 50.0 Pr2 °F
[-100.0°C to 150.0°C]
[-148.0°F to 302.0°F]
FAn Hy2 Set Point 2 differential (for condenser fan) 20.0 Pr2 °F
[0.1°C to 25.0°C]
[0.1°F to 45.0°F]
FAn FCC Condenser fan operating mode C-n Pr2 C-n(0); O-n(1); C-Y(2); O-Y(3)
FAn Fd3 Condenser fan activation delay 0 Pr2 sec 0 to 255 sec
FAn Fd4 Condenser fan deactivation delay 0 Pr2 sec 0 to 255 sec
AUS ACH Type of control for auxiliary regulator CL Pr2 CL(0); Ht(1)
AUS SAA Set point for auxiliary regulator 38.0 Pr2 °F
[-100.0°C to 150.0°C]
[-148.0°F to 302.0°F]
AUS SHy Auxiliary regulator differential 4.0 Pr2 °F
[0.1°C to 25.0°C]
[0.1°F to 45.0°F]
AUS ArP Probe selection for auxiliary regulator nP Pr2 nP(0); P1(1); P2(2); P3(3); P4(4)