Emerson Dixell IEV22D Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 60

Emerson Dixell IEV22D Скачать руководство пользователя страница 6

1592026260 IEV22-24D GB r.1.0 21.02.2019 IEV 6/60

1.3

PRODUCT DISPOSAL (WEEE)

With reference to Directive 2002/96/EC of the European Parliament and of the Council of 27 January
2003 and to the relative national legislation, please note that:

•

There lies the obligation not to dispose of electrical and electronic waste as municipal
waste but to separate the waste.

•

Public or private collection points must be used to dispose of the goods in accordance
with local laws. Furthermore, at the end of the product's life, it is also possible to return
this to the retailer when a new purchase is made.

•

This equipment may contain hazardous substances. Improper use or incorrect disposal
can have adverse effects on human health and the environment.

•

The symbol shown on the product or the package indicates that the product has been
placed on the market after 13 August 2005 and must be disposed of as separated
waste.

•

Should the product be disposed of incorrectly, sanctions may be applied as stipulated in
applicable local regulations regarding waste disposal.

«
...
4
5
6
7
8
...
»

Содержание Dixell IEV22D





























































Отзывы:

Нет отзывов