Emerson Dixell IEV22D, Руководство пользователя, Страница: 29 / 60

1592026260 IEV22-24D GB r.1.0 21.02.2019 IEV 29/60
Data of pre-configured valves
Parameter
Ec9/Ec18
Model
Ec14 /
Ec23
(steps
*10)
Ec13 /
Ec22
(steps*10
)
Ec15 /
Ec24
(mA*10)
Ec16 /
Ec25
(mA*10)
Ec50
/Ec52
Ec51/
Ec53
0
Manual
setting
Config
.
Config. Config. Config. Config. Config.
1
Danfoss
ETS-25/50
0 2625 10 10
1 1
2
Danfoss
ETS-100
0 3530 10 10
1 1
3
Danfoss
ETS-250/400
0 3810 10 10
1 1
4
Alco
EX4-EX5-EX6
0 750 50 10
1 1
5 Alco EX7 0 1600 75 25 1 1
6 Alco EX8 500 0 2600 80 50 1 1
7
Configuration
1
50 480 45 10
0 0
8
Configuration
2
50 380 45 10
0 0
7.3.2 Parameters to set in the event of manual configuration of the valve
Ec13/Ec22 maximum number of steps of valve
Refer to the technical documentation of the valve to set this parameter correctly.
(this value is set automatically by the controller if EC9> 0 and / or EC18> 0)
Ec14/Ec23
Minimum number of valve steps
Refer to the technical documentation of the valve to set this parameter correctly.
(this value is set automatically by the controller if EC9> 0 and / or EC18> 0)
Ec15/Ec24 maximum movement current
Refer to the technical documentation of the valve to set this parameter correctly.
(this value is set automatically by the controller if EC9> 0 and / or EC18> 0)
Ec16/Ec25 Holding current value
Refer to the technical documentation of the valve to set this parameter correctly.
(this value is set automatically by the controller if EC9> 0 and / or EC18> 0)
Ec50/Ec52 Setting of the kind of movement current
Valve manufacturers use different ways of controlling them; parameters Ec50/Ec52 are used to
establish whether the movement current value is a peak value or an RMS value in MICROSTEPPING
ADJUSTMENT mode.