manualshive.com logo in svg

Emerson Daniel 3818, Руководство по установке

Поделиться
Скачать
Emerson Daniel 3818 Скачать руководство пользователя страница 25

—

Pressure Equipment Directive (PED )

—

Electromagnetic Compatibility (EMC)

—

International Organization of Legal Metrology (OIML)

Approval Agencies

•

UL

•

ULC

•

DEMKO

•

NMi

•

INMETRO

•

NEPSI

•

GOSTR

Important

Please consult Daniel for a complete metrology approvals list.

1.11

FCC compliance

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.

NOTICE

Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

Installation manual

Introduction

3-9000-771

May 2019

Installation manual

25

Содержание Daniel 3818



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды