Emerson 851-1000, Инструкция по установке и эксплуатации

Страница: 15 / 18

14 • PMAC II I&O Manual 026-1501 Rev
6
fields. You may have to turn on Full Options
mode to see these fields (press
(6
in Ein-
stein, or press
6
+ in E2, then press
"
and
!
to leave and return to this screen.
The fields should then be visible).
3. Press B (NEXT TAB) to advance to the
Inputs Setup screen ( Figure 4-6 ).
4.4.2.3. Screen 3: Inputs
1. If you are using temperature and humidity
sensors to calculate the dewpoint, enter the
board and point input locations for these de-
vices here. If you are using a dewpoint sen-
sor, enter the board and point input location
for the sensor here.
2. Press B (NEXT TAB) to advance to the
Outputs Setup screen ( Figure 4-7 ).
4.4.2.4. Screen 4: Outputs
1. In the OUTPUT field, enter the point on the
8DO board (located in the PMAC II) that cor-
responds to the anti-sweat channels you wish
to control. See Table 4-1 , Table 4-2 , and Ta-
ble 4-3 to see which point controls which
channels .
Figure 4-6 - Anti-Sweat Inputs Setup Screen
Figure 4-7 - Anti-Sweat Outputs Setup Screen
8DO Points for 16
Channel
Anti-Sweat Channel
Circuits
1 7, 8
2 5, 6
3 3, 4
4 1, 2
5 15, 16
6 13, 14
7 11, 12
8 9, 10
Table 4-1 - 8DO Board Points to PMAC II 16 Channel
8DO Points for 20
Channel
Anti-Sweat Channel
Circuits
1 1, 2
2 3, 4
3 5, 6
4 7, 8
5 9, 10
6 11, 12
7 13, 14, 17, 18
8 15, 16, 19, 20
Table 4-2 - 8DO Board Points to PMAC II 20 Channel
8DO Points for 28
Channel
Anti-Sweat Channel
Circuits
1 1, 2, 15, 16
2 3, 4, 17, 18
3 5, 6, 19, 20
4 7, 21
5 8, 9, 22, 23
6 10, 11, 24, 25
7 12, 13, 26, 27
8 14, 28
Table 4-3 - 8DO Board Points to PMAC II 28 Channel