EES-101 Series Ultrasonic Flowmeter
Revision: 3.0.1
Page 46 of 65
2. The setting value changes according to the
change of length unit, and default is set
according to the initial setting;
3. The settings will be saved;
4. Return "set error" when setting error, return
"memory error" when storage error, and
return "OK" when success.
SREBOOT
System restart
1. Write command without parameters;
2. Watchdog restart is used to test the
watchdog restart function.
SRST
Restore factory settings
1. Write command without parameters;
2. The settings will be restored to the default
values.
SSPE
Set single pulse heating (cooling) value
1. Write instructions with parameters;
2. It has nothing to do with the unit;
3. The settings will be saved;
4. Set error returns "Set error", storage error
returns "Memery error", and success returns
"OK".
SSPF
Setting single pulse flow value
1. Write command with parameters;
2. It has nothing to do with the unit;
3. The settings will be saved;
4. Return "set error" when setting error, return
"memory error" when storage error, and
return "OK" when success.
STIME
Set time
1. Write command with parameters, such as
STIME15:20:46;
2. If the WiFi distribution network is
successful, it will automatically update time
according to the server time and the setting is
meaningless;
3. Setting error returns "set error", success
returns "OK".
SWT
Set wall thickness
1. Write command with parameters;
2. The setting value changes according to the
length unit, and default use the initial wall
thickness;
3. The settings will be saved;
4. Return "set error" when setting error, return
"memory error" when storage error, and
return "OK" when success.
SUB
Setting communication baud rate
1. Write command with parameters, for
example: SUB0;
2. Parameter 0 - 4800, parameter 1 - 9600
(default), parameter 2 - 14400, parameter 3 -
19200, parameter 4 - 34800, parameter 5 -
43000, parameter 6 - 57600, parameter 7 -
76800, parameter 8 - 115200, other values are