17
OFF
-----------------
Saving / Discarding changes / Activating working mode
Once edited data into setup menu it’s possible to save them by pressing
“E”
key or to discard them by pressing
“ESC”
key.
To activate a working mode (Constant, Divide, Multiply, PPM, PERC, MLQ, Batch, Volt, mA) select the required mode and
confirm it using
“E”
key.
Turning on and off the pump
“ESC”
key has a double function. It can be used to discard all changes made into setup mode or to turn on/off the pump. To
turn on/off the pump press and keep pressed this key while in main screen (fig.3). The pumps will show:
To return into operating mode press
“ESC”
key.
Full menu / Short Menu mode
When entering into SETUP display shows access mode menu:
If this is the first time into SETUP menu then the pump will automatically set itself into “FULL” menu mode as shown in fig. A.
Just press “E” key to confirm. This mode will show all pump functions and working modes.
Next time the SETUP menu will be reached it will possible to operate with “SHORT” menu configuration to change only selected
mode parameters as shown in fig. B. Press “E” to confirm.
Note: “SHORT” menu option is not available during first time into SETUP menu or after a reset.
fig.6
FULL
MENU
SHORT
MENU
fig. A
fig. B
