the 10GbE switch) is required for connecting to the RMM port. (The VxRail 60 Appliance can be
used with a 1GbE switch.)
Figure 21: VxRail Appliance interface ports (RJ45 network connectors shown)
No.
Interface port or
feature
Description
1
USB ports
Dual USB 3.0 ports for connecting USB devices.
2
VGA port
Standard VGA compatible, 15-pin display connector. Supports up to 1920 x 1200
resolution, 32 bpp at 60 Hz.
3
Serial port
Standard DB9 serial port.
4
RMM port (BMC
interface)
Dedicated BMC Rj45 LAN port for remote management and control.
5
Power button
Press and hold for more than 4 seconds to power off the motherboard.
6
Mainboard status
indicator
Off: normal.
Flashing amber: BMC reports system health fault.
7
Power indicator
Off: power is off.
Flashing blue: BMC reports system health fault.
Finding the RMM DHCP address
If your VxRail Appliance RMM port has been assigned an address by the DHCP server, use this
procedure to find the IP address using a locally attached VGA display and keyboard.
Procedure
1
During the power-on self test (POST) press <F2> to enter BIOS Setup.
2
When prompted for a password, enter
emcbios
.
3
On the BIOS main screen, navigate to
Server Mgmt > BMC network configuration
.
Out-of-band management
VCE VxRail
™
Appliance 3.5 Product Guide
77
©
2016 VCE Company, LLC.
All Rights Reserved.
