About this task
Cluster health monitoring is normally enabled. You may want to disable it when you are performing
service, such as replacing disks and so on.
Procedure
1
In VxRail Manager click
CONFIGURATION
. The
Configuration
window is displayed.
2
Click
General
. The
General
tab is displayed.
3
In the
Suppress Cluster Monitor
section, select one of the following:
—
Suppress Mode On:
Cluster health is not monitored.
—
Suppress Mode Off:
Cluster health is monitored and reported. This is the default setting.
4
Click
Apply
.
Results
When cluster health monitoring is disabled (
Suppress Mode
set to
On
) VxRail Manager displays a
banner indicating that monitoring is suppressed. You can close the banner by clicking the
X
on the right
side of the banner.
Running a complete system diagnostic
Follow these steps to run a complete system diagnostic report for your VxRail Appliance.
Procedure
1
In VxRail Manager click
CONFIGURATION
. The
Configuration
window is displayed.
2
Click
General
. The
General
tab is displayed.
3
In the
System Diagnostic
section, click
Diagnostic
. VxRail Manager runs a system-wide
diagnostic analysis of the appliance. The
System Diagnostic
window is displayed.
4
Observe the
Health check list
in the
System Diagnostic
window. Click items in the list to
expand them for more information.
5
When you are finished with the diagnostic report click
Close
.
Shutting down a VxRail Appliance cluster
You can shut down your VxRail Appliance cluster from VxRail Manager. This feature provides a graceful,
automated process for properly shutting down a cluster.
Administration
VCE VxRail
™
Appliance 3.5 Product Guide
47
©
2016 VCE Company, LLC.
All Rights Reserved.
