A
B
10
20
20
40
25
45
30
55
40
65
50
75
A
A
Series
IZS31
Specific Pr
Be sure to read this be
Mounting
Caution
1. Install the ionizer away from a wall as
below.
If a wall is located closer than the illustration
generated will not be able to reach the object
static electricity removal and therefore result in
efficiency.
200 200 150
After installation, be sure to verify the
static electricity removal.
The effects vary depending on the ambie
operating conditions, etc. After installation, verify
static electricity removal.
2. Install a feedback sensor away from
illustrated below.
The ionizer may fail to measure electrost
correctly if a wall or other obstacle exists within
shown in the following figure.
B B B
Charged object Charged object
(mm)
1
roduct Precautions 2
efore handling.
Wiring
/
Piping
as illustrated
below, the ions
object which requires
in a decrease in
150
Warning
1. Before wiring confirm if the power
is enough and that it is within
before wiring.
2. Be sure to provide class-D grounding
maintain product performance.
If such grounding is not provided, not
be disrupted but electric shocks ma
ionizer or power supply may break down.
Unit: mm
the effects of
ent conditions,
verify the effects of
Brown
from the wall as
tatic potentials
within the clearances
Blue
Class-D ground
object
3. Be sure to turn off the powe
wiring (including attachment/detachment
connector).
4. To connect a feedback sen
sensor to the ionizer, use the
the sensor. Do not disassemble
ionizer.
5. When applying the power
attention to the wiring and/o
environment until safety is confirmed.
6. Do not connect or remov
including the power supply, while power
supplied. Otherwise, the ionizer
7. If the power line and high
routed together, this produ
due to noise. Therefore, use
route for this product.
8. Be sure to confirm there ar
before starting this product.
Incorrect wiring will lead to damag
product.
9. Flush the piping before using.
Before using this product, exerc
particles, water drop, or oil from entering
Piping
power supply voltage
within the specifications
grounding in order to
performance.
not only may the ion balance
may also result and the
down.
DC power supply
Brown
Blue
ground
+24 VDC
GND
power supply before
(including attachment/detachment of the
nsor or autobalance
the cable included with
disassemble or modify the
supply, pay special
and/or
surrounding
confirmed.
ve any connectors
while power is being
ionizer may malfunction.
h pressure line are
duct may malfunction
use a separate wiring
are no wiring errors
damage or malfucntion to the
using.
cise caution to prevent
entering the piping.
