EMBRON Hatteland Technology 1 G2 Series, Руководство пользователя

Страница: 70 / 128

70
IND100129-269
All specifications are subject to change without prior notice!
Specifications - JH 15T17 MMD-xRx-xxxx
SPECIFICATIONS
Note: All specifi cations are subject to change without prior notice!
Please visit www.hattelandtechnology.com for the latest electronic version.
2/2
• W:412.00 [16.22''] x H:345.00 [13.58''] x D:73.28 [2.89''] mm [inch]
• Weight: Approx. 5.5kg / 12.1lbs
• JH 15TBR STD-B1 : Mounting Bracket
• JH 15TRO STD-A1 : Rotary Bracket
• JH 15TSV STD-A1 : Sun Visor
• JH 15VED STD-A1 : VESA Adapter 75/100mm
• JH 15TAP STD-A1 : 15" Adapter Frame to 19" Rack
• JH 15TAP STD-B1 : 15" Adapter Frame to 17" CRT cut-out
• JH 15TWC STD-A1 : Water Cover
• Resistive* or Capacitive Touch Screen
• Optical Bonding Technology
• Keypad only or PBuzzer controls
Physical Considerations:
Available Accessories:
Factory Options:
*Can not be combined with Optical Bonding Technology
• Native Resolution : 1024 x 768
• Pixel Pitch (RGB) : 0.297 (H) x 0.297 (V) mm
• Response Time : 8ms (typical), black to white
• Contrast Ratio : 1500:1 (typical)
• Light Intensity : 400 cd/m² (typical)
• Viewable Angle : +/- 85 deg. (Up/Down/Left/Right) (typical)
• Active Display Area : 304.1 (H) x 228.1 (V) mm
• Max Colors : 16.7 million
• High Quality TFT with LED Backlight Technology
• 15.0 inch viewable image size, Aspect Ratio 4:3
• TFT active-matrix liquid crystal panel
TFT Technology:
TFT Characteristics:
On front bezel - Keypad control (IP66) xRx-xxAx models:
• Power On/Off and On Screen Display Menu (push button)
• Brightness Control (up/down - push buttons)
• Hotkeys (left/right - push buttons)
• Mode Status Red/Green Illuminated LED-Ring Indicator
On front bezel - Potmeter control (IP66) xRx-xxBx models:
• Power On/Off and On Screen Display Menu (push button)
• Brightness Control (rotary control)
• Hotkeys (left/right - push buttons)
• Mode Status Red/Green Illuminated LED-Ring Indicator
• Buzzer
User Controls:
Multi-power Supply:
• 100-240V AC - 50/60Hz + 24 VDC
Note: You may connect either AC power or DC power or both. In case both sources
are connected, power will be sourced from the AC input. If AC input is lost, there will
be a uninterrupted switch-over to DC input.
Power Consumption:
• Operating AC/DC: 75W (max)
Power Specifications:
Resolutions:
• VGA : 640 x 480 (including 640 x 350)
• SVGA : 800 x 600 (including 720 x 400)
• XGA : 1024 x 768*
* Recommended for optimal picture quality
Video Signals:
• Interlaced HDTV, NTSC, PAL and SECAM video
• Composite video
Supported Signals:
A P P R O V A L S & C E R T I F I C A T E S
These products have been tested / type approved by the following classification societies: *=PENDING
IEC 60945 4th (EN 60945:2002) IACS E10 EN55024 EN55022, Class A EU RO MR - Mutual Recognition*
DNV GL - Det Norske Veritas / Germanischer Lloyd* LRS - Lloyd’s Register of Shipping* ABS - American Bureau of Shipping*
CCS - China Classification Society KR - Korean Register of Shipping* BV - Bureau Veritas* ClassNK - Nippon Kaiji Kyokai*
• DVI-I IN : 2 x 29p DVI Female (or as VGA IN with adapter)*
• DP1.2 IN : 1 x 20p DisplayPort (female)
• Comp. Video IN : 3 x BNC Connector (female)
• SCOM RS-422/485 : 2 x 5-pin Terminal Block 3.81, non-iBuzzer
• SCOM USB : 1 x USB TYPE A Connector (female)
• SCOM Ethernet : 1 x RJ45 Connector
• SCOM RS-232 : 1 x 9p D-SUB (female)
• VGA OUT : 1 x 15p HD D-SUB (female) - Clone of VGA IN**
• Potmeter/User : 1 x 9p D-SUB (male)
(Potentiometer IN, +5VDC OUT, BRT +/- IN)
• If Touch Screen : 1 x 9p D-SUB (female)
• AC Power IN : 1 x Std IEC Inlet
• DC Power IN : 1 x 2-pin Terminal Block 5.08
* DVI-I Port #1 as VGA IN also acts as clone to VGA Signal Out (buffered).
**Tested at recommended resolutions. The VGA output signal (buffered) is at same
resolution and sync as the VGA input. The output is working even if the display unit is
turned off, but power cable/supply must be connected/provided.
Note for DVI and VGA signal inputs:
DVI-I #1, DVI-D #1 and VGA #1 is Single Link.
DVI-I #2, DVI-D #2 and VGA #2 is Dual Link.
Signal Terminals:
• Operating
: Temperature -15
°
C to +55
°
C
• Storage : Temperature -20 ° C to +60 ° C
• Humidity : Up to 95% (Operating / Storage)
• IP-Rating Protection : IP66 front - IP20 rear (EN60529).
• Compass Safe Distance : Standard: 110cm - Steering: 70cm
Lifetime Considerations:
Even though the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Environmental Considerations: