EMBRON Hatteland Technology 1 G2 Series, Руководство пользователя

Страница: 53 / 128

53 User Controls
IND100064-72
|---2---
Multi-PIP Settings - PIP Display *Available only when PIP Mode on
When PIP Child mode is active, the size and position of the rectangle displaying the Secondary
Source can be adjusted via the submenus below. Secondary Source needs to be a valid signal
source.
|--------3--------
Multi-PIP Settings - PIP Display -- PIP Child Size
Settings as follows:
"PIP Size" = Adjust the full size (H and V) for Secondary Source,
values from 1 to 9. Factory Default is 9.
"PIP H-Size" = Adjust the Horizontal size for Secondary Source,
values from 0 to 20. Factory Default is 10.
"PIP V-Size" = Adjust the Vertical size for Secondary Source,
values from 0 to 20. Factory Default is 10.
● Note: Default value for all 3 functions is 0.
|--------3--------
Multi-PIP Settings - PIP Position
When PIP Child mode is active, the size and position of the frame displaying the Secondary
Source can be adjusted by means of submenus for size and position respectively below.
Settings as follows:
"PIP H-Position" = Adjust the Horizontal (left/right) position for Secondary
Source, values from 0 to 100. Factory Default is 50.
"PIP V-Position" = Adjust the Vertical (up/down) position for Secondary Source,
values from 0 to 100. Factory Default is 50.
|---2---
Multi-PIP Settings - Swap Source
Swaps the Main and Secondary source signals (if present) including adjustments you may have
made, meaning that whatever is in Main Source will become the contents of the defined PIP
rectangle, and contents of the PIP rectangle to become full screen.
● Note: You can also assign the Swap Source to the Hotkeys. Review “OSD Settings - Hot Key
Assignment / Swap Source” section later in this manual.
● Note: Switch time between Main and Secondary source is ~5 sec.
OSD Menu Functions