EMBRON Hatteland Technology 1 G2 Series, Руководство пользователя

Страница: 41 / 128

41 User Controls
OSD Menu Overview
IND100064-73
Management Settings
Level 1 (Main Menu) Level 2 Level 3 Level 4 Level 5
Management Settings > < Exit
* Graphic Scaling >
< Exit
Graphic Scaling > Full Screen,
Fill to Aspect Ratio, One To One
Zoom > (Slider Bar 0~100)
Horizont Stretch > (Slider Bar 0~100)
Vertical Stretch > (Slider Bar 0~100)
Auto Adjustment > On, Off
*Unknown Timing Search > < Exit
Auto Mode > < Exit
Display Size > 4:3, 5:4, 1:1, 16:9, 16:10
Execute > (Automatic Action)
Blind Mode > < Exit
H. Resolution > (Slider Bar 0~2000)
V. Resolution > (Slider Bar 0~2000)
Total H. Line > (Slider Bar 0~2000)
H. Blank Pixels > (Slider Bar 0~500)
V. Blank Pixels > (Slider Bar 0~500)
Execute > (Automatic Action)
Save Timing > Save Timing 1 to 8 > (Automatic Action)
Clear Timing > Clear Timing 1 to 8 > (Automatic Action)
*GDC Sensitivity > (Slider Bar 0~255)
*Filter > Enable, Disable
*Communication > < Exit
RS232 > (Select)
2-wire RS-485 > (Select)
4-wire RS485/422 > (Select)
Address RS > (Slider Bar 0~15)
IP Address > Auto IP > (Select)
Fixed IP > (Number Input;
xxx.xxx.xxx.xxx)
USB (Select)
Enable RS232
FW Download >
Enable, Disable
*Power Plan > < Exit
VGA Out / USB in OFF Mode > Enable, Disable
LAN in OFF / Sleep Mode > Enable, Disable
*Touch Power Enabled >
< Exit
Always Active > (Select)
Any signal is On > (Select)
Select signal is On > < Exit
Digital 1 > (Select)
Digital 2 > (Select)
Analog RGB 1 > (Select)
Analog RGB 2 > (Select)
Composite 1 > (Select)
Composite 2 > (Select)
Composite 3 > (Select)
DisplayPort 1 > (Select)
*External Power Button > Enable, Disable
*DDC/CI Setting >
Digital 1, Digital 2,
Analog RGB1, Analog RGB2,
DisplayPort 1, None