EMBRON Hatteland Technology 1 G2 Series Скачать руководство пользователя страница 55

Страница: 55 / 128

User Controls

OSD Menu Functions

IND100064-72

OSD Miscellaneous

Allows you to customize the visual appearance of the On Screen Display (OSD) menu, such as; position,

transparency, time-out, assign hot keys, define access modes and save, load and recall favourite settings

and more. The contents of these submenus are listed below.

|---2---

OSD Miscellaneous

- OSD Position

Settings as follows:

"OSD H. Position"

= Place the OSD menu overlay Horizontally (left/right),

values from 0 to 255.

"OSD V. Position"

= Place the OSD menu overlay Vertically (up/down),

values from 0 to 255.

● Note: Default position of the OSD menu overlay is in the lower left corner of the of the Active Display area.

Default value for both functions is 255.

|---2---

OSD Miscellaneous

- Language

Available OSD language to be used for all text and warnings that may appear.

Settings as follows:

"Norsk"

= Display OSD in Norwegian.

"English"

= Display OSD in English.

"Français"

= Display OSD in French.

"Deutsch"

= Display OSD in German.

"Italiano"

= Display OSD in Italian.

日本語

= Display OSD in Japanese.

簡體中文"

= Display OSD in Simplified Chinese.

● Note: Current selected language is shown in green color. Default language is English.

|---2---

OSD Miscellaneous

- Presets

Allows you to work with Memory Presets (Recall/Save/Load) for OSD menu settings and overlays.

The contents of the submenu is listed below.

Settings as follows:

"Recall"

= Reset back to factory defaults. Will override and restore all previous

modified settings.

Содержание Hatteland Technology 1 G2 Series

































































































































Результаты поиска

Содержание Hatteland Technology 1 G2 Series

Отзывы:

Похожие инструкции для Hatteland Technology 1 G2 Series

Бренды по названию

Популярные бренды

EMBRON Hatteland Technology 1 G2 Series, Руководство пользователя

Результаты поиска

Содержание Hatteland Technology 1 G2 Series

Отзывы:

Похожие инструкции для Hatteland Technology 1 G2 Series

Бренды по названию

Популярные бренды