Pinout Assignments
75
IND100241-30
Appendix
5-pin PS/2 KEYBOARD Female (Onboard or via Option)
Pin 1: Keyboard Data
Pin 3: Ground
Pin 5: Keyboard Clock
Pin 2: Not Connected
Pin 4: Vcc +5V
Pin 6: Not Connected
5-pin PS/2 MOUSE Female (Onboard or via Option)
Pin 1: Mouse Data
Pin 3: Ground
Pin 5: Mouse Clock
Pin 2: Not Connected
Pin 4: Vcc +5V
Pin 6: Not Connected
10+10 pin RS-422 / RS-485 NMEA Module
Type Number “PCA200828-1 / PCA100293-1”
6 7 8 9 10
1 2 3 4 5
6 7 8 9 10
1 2 3 4 5
PIN 01 TxD- Transmit Data Negative
PIN 02 TxD+ Transmit Data Positive
PIN 03 GND Isolated Ground
PIN 04 RxD- Receive Data Negative
PIN 05 RxD+ Receive Data Positive
PIN 06 TxD- Transmit Data Negative
PIN 07 TxD+ Transmit Data Positive
PIN 08 GND Isolated Ground
PIN 09 RxD- Receive Data Negative
PIN 10 RxD+ Receive Data Positive
RS-485 Half Duplex (2-wire) Confi guration:
Connect TX and RX pair-wise:
TX- to RX-, TX+ to RX+.
*Note: The jumper for “force of transmitter” is
open by factory default. For some custom
models this jumper is preset to closed (active),
in that case unit has to be opened and jumper
set to open to allow Half Duplex mode.
20-pin DisplayPort (DP) Female
20 18 16 14 12 10 8 6 4 2
19 17 15 13 11 9 7 5 3 1
PIN 01
ML_Lane 0 (p) - Lane 0 (positive)
PIN 02
GND - Ground
PIN 03
ML_Lane 0 (n) - Lane 0 (negative)
PIN 04
ML_Lane 1 (p) - Lane 1 (positive)
PIN 05
GND - Ground
PIN 06
ML_Lane 1 (n) - Lane 1 (negative)
PIN 07
ML_Lane 2 (p) - Lane 2 (positive)
PIN 08
GND - Ground
PIN 09
ML_Lane 2 (n) - Lane 2 (negative)
PIN 10
ML_Lane 3 (p) - Lane 3 (positive)
PIN 11
GND - Ground
PIN 12
ML_Lane 3 (n) - Lane 3 (negative)
PIN 13* CONFIG1 - connected to Ground*
PIN 14* CONFIG2 - connected to Ground*
PIN 15
AUX CH (p) - Auxiliary Channel (positive)
PIN 16
GND - Ground
PIN 17
AUX CH (n) - Auxiliary Channel (negative)
PIN 18
Hot Plug - Hot Plug Detect
PIN 19
Return - Return for Power
PIN 20
DP_PWR - Power for connector (3.3 V 500 mA)
*Pins 13 and 14 may either be directly connected to ground or
connected to ground through a pulldown device. This is the pinout for
source-side connector, the sink-side connector pinout will have lanes
0–3 reversed in order; i.e., lane 3 will be on pin 1(n) and 3(p) while
lane 0 will be on pin 10(n) and 12(p).
4+4 pin CAN I/O Module, 2 channels
Type Number “ZIA0001310-B / ZIA0001310-SLCAN”
X8
CAN1
X9
CAN2
1 2 3 4
1 2 3 4
Pin 01 X8 - Can1:
081
In Low
Pin 02 X8 - Can1:
082
Out Low
Pin 03 X8 - Can1:
083
In High
Pin 04 X8 - Can1:
084
Out High
Pin 01 X9 - Can2:
091
In Low
Pin 02 X9 - Can2:
092
Out Low
Pin 03 X9 - Can2:
093
In High
Pin 04 X9 - Can2:
094
Out High
8-pin RJ-45 10/100Mbps LAN/Ethernet
PCA100298-1 / HT 00274 OPT-A1
1 2 3 4 5 6 7 8
Pin 01 - TDP Transmit Differential Pair (Positive)
Pin 02 - TDN Transmit Differential Pair (Negative)
Pin 03 - RDP Receive Differential Pair (Positive)
Pin 04 - NC
Not Connected
Pin 05 - NC
Not Connected
Pin 06 - RDN Receive Differential Pair (Negative)
Pin 07 - NC
Not Connected
Pin 08 - NC
Not Connected
Содержание HATTELAND HT B30G STC M Series
