EMBRON HATTELAND HT B30G STC M Series, Руководство пользователя

Страница: 29 / 114

Physical Overview - HT B30xx STC-xxx-xxxxxx
29
IND100133-68
2 x Network LAN1, LAN2 INPUT / OUTPUT:
Supports 10/100/1000Mbps Ethernet (LAN). Suitable for twisted pair cables CAT.5E. Make sure the network cable
connector ”clicks” into the RJ-45 connector. Network ports are Intel® Gigabit LAN, supports Teaming.
2 x Network LAN3, LAN4 INPUT / OUTPUT:
Supports 10/100/1000Mbps Ethernet (LAN). Suitable for twisted pair cables CAT.5E. Make sure the network cable
connector ”clicks” into the RJ-45 connector. Network ports are Realtek Gigabit LAN, supports Teaming.
1 x SDXC (SDcard slot - SDXC 3.0 Standard):
Supports “Secure Digital - High Capacity” cards. The slot has a locking mechanism which “clicks” into place when card
has been inserted and secured properly. Supported SD standards: SD (Up to 2GB (FAT12/16),
SDHC (>2GB up to 32GB (FAT32)) and SDXC (>32GB up to 2TB (exFAT)).
Note: For full support of the standards listed above in Windows® Operating Systems, Microsoft® Windows® 10 IoT or
newer is required as well as own dedicated driver package installed. Windows® 7 is not supported.
1 x DC POWER INPUT (HT B30G Model):
Connect your DC power cable to the Terminal Block 5.08 connector. The internal DC power module supports 24VDC.
For more information, please review “Housing Connector Overview” earlier in this manual.
2 x DC POWER INPUT - DUAL (HT B30K Model):
Connect your DC power cables to the Terminal Block 5.08 connectors. The internal DC power module supports
24VDC. The unit offer both Primary and Secondary power inputs for secure operation of the unit as well as; galvanic
isolated and automatic switch between power source. For more information, please review “Housing Connector
Overview” earlier in this manual.
1 x POWER INPUT (HT B30G Model):
The internal AC power module supports both 100-240VAC 50/60Hz input.
Multi-power note (HT B30G Model):
The unit has a dual input power supply which will accept both AC and DC input. If both inputs are connected, the
unit will be powered by AC. If AC is disconnected it will automatically switch over to DC without affecting the operation
of the unit. This makes it possible to use AC power as primary power and a 24V battery as secondary power,
eliminating the need for expensive UPS systems.