Embraer EMB-505 Phenom, Руководство по обслуживанию, Страница: 71 / 224

GROUND HANDLING AND
SERVICING HANDBOOK
EFFECTIVITY: ALL 12-11-00-650-803-A/300
Page 301
NOV 20/09
Copyright © by EMBRAER S.A - All rights reserved - See title page for details.
H
A
R
D
C
O
P
Y
I
S
U
N
C
O
N
TR
O
L
L
E
D
.
O
N
C
E
P
R
IN
TE
D
,
T
H
IS
P
A
G
E
M
U
S
T
N
O
T
B
E
R
E
T
A
IN
E
D
FO
R
F
U
TU
R
E
R
E
F
E
R
E
N
C
E
.
B
E
FO
R
E
U
S
IN
G
,
M
A
K
E
S
U
R
E
TH
IS
H
A
R
D
C
O
P
Y
I
S
T
H
E
L
A
TE
S
T
IS
S
U
E
.
GHSH TASK 12-11-00-650-803-A
1. Fuel Tank - Pressure Refueling
A. General
(1) This task gives the procedure to do the pressure refueling of the aircraft.
(2) These fuels are approved by Embraer:
• Fuel JET A-1 (Refer to Appendix C - Consumable Materials)
• Fuel JET A (Refer to Appendix C - Consumable Materials)
• Fuel JP-8 (Refer to Appendix C - Consumable Materials)
(3) These fuel additives are approved by Embraer:
• DIETHYLENE GLYCOL MONOMETHYL ETHER
• CORROSION INHIBITOR/LUBRICITY ADDITIVE MIL-I-25017
NOTE: Obey the fluid manufacture's specifications to find the additive
proportions for each fuel.
(4) Use the pressure refueling adapter and the pressure-refueling control
panel to do this procedure.
(5) The pressure-refueling control panel includes a repeater indicator display
which has an internal fuel-quantity preselecting system for refueling the
tanks.
(6) The pressure refueling adapter is installed adjacent to the pressure-refueling
control panel, behind an access door on the right wing-to-fuselage fairing in
zone 191.
B. Job Set-Up
WARNING: MAKE SURE THAT THE AIRCRAFT IS IN A SAFE
CONDITION BEFORE YOU DO THE MAINTENANCE
PROCEDURES. THIS IS TO PREVENT INJURY TO
PERSONS AND/OR DAMAGE TO THE EQUIPMENT.
(1) Do the procedure to make the aircraft safe for maintenance (GHSH TASK
20-00-00-910-801-A).
(2) Do the procedure to make the aircraft safe for maintenance of the fuel sys-
tem (GHSH TASK 28-00-00-910-801-A).
(3) Statically ground the aircraft (GHSH TASK 20-40-02-910-801-A).
NOTE: Make all grounding connections between the fuel source, air-
craft, and fuel nozzle (refer to the requirements of the local
regulatory authorities).
(4) Energize the aircraft with an external DC power supply (GHSH TASK 24-
41-00-860-801-A).
NOTE: If an external DC power supply is not available, lift the guard
and set the POWER SELECTOR switch to the BATTERY
position on the pressure-refueling control panel.