P3 OVERVIEW
1. OVERVIEW
ICF series cartridge filter combines superior water filtration with ease of operation and corrosion-free
construction. With filtration ratings of 6,000~7,200 gallons (22,710 ~ 27,250 liters) per hour, they are designed
for continuous or intermittent operation, for installation above or below the pool waterline, for fresh or
saltwater swimming pools or spas. ICF series filters utilize multiple reusable, reinforced polyester filter
cartridge elements to provide a high degree of water clarity and long filter cycles with minimum care.
READ UNDERSTAND AND FOLLOW ALL SAFETY AND OPERATION:
Do not operate the filter until you have read and understand clearly all the operating
instructions and warning messages for all equipment that is a part of the pool circulating
system. The following instructions are intended as a guide for initially operating the filter in
a general pool installation. Failure to follow all operating instructions and warning
messages can result in property damage or severe personal injur y or death.
To reduce the risk of injur y, do not permit children to use this product.
ELECTROCUTION HAZARD
Direct water discharge from air relief valve away from electrical ser vice. Do not locate pump
control over near the filter.
Due to the potential risk that can be involved, it is recommended that the
pressure test be kept to the minimum time required by the local code. Do
not allow people to work around the system when the circulation system
is under the pressure test. Post appropriate warning signs and establish a
barrier around the pressurized equipment. If the equipment is located in
an equipment room, lock the door and post a warning sign.
Never attempt to adjust any closures or lids or attempt to remove or tighten bolts when the system is
pressurized. These actions can cause the closure to separate and could cause severe personal injur y or death if
they were to strike a person.
N e v e r e x c e e d t h e m a x i m u m o p e r a t i n g p r e s s u r e o f s y s t e m
components. Exceeding these limits could result in a component
failing under pressure. This instantaneous release of energy can cause
the closure to separate and could cause severe personal injur y or
death if they were to strike a person.
HYPERTHERMIA
SPA water temperature excess of 38°C (104°F) may be injurious to
health.
Measure water temperature before entering SPA to strike a
person.
Hyperthermia occurs when the internal temperature of the body reaches a level several degrees above the
normal body temperature of 98.6 °F (37 °C). The symptoms of hyperthermia include drowsiness, lethargy, and
an increase in the internal temperature of the body.
