eMachines 1stMainboard AM37 Скачать руководство пользователя

Страница: 49 / 51

3 - 21

BIOS Setup

Voltage VCORE / V 2.5 V / V3.3 V / V5 V /
V12 V / Voltage 5VSB / Voltage Battery / SYSTEM Temp. /
CPU Temp. / CPU FAN Speed / Chassis FAN Speed

These items allow end users and technicians to monitor data provided by

the BIOS on this mainboard. It is not user-configurable.

Frequency/Voltage Control

Auto Detect DIMM/PCI Clk

When enabled, BIOS will detect the PCI slot and DIMM slot. If no any

device in, BIOS will auto disable its clock.

The options are: Enabled, Disabled.

Spread Spectrum

This feature is used to select the spread Spectrum range or disable it.

The options are: Disabled and all allowed ranges in percentage.

CPU Host/AGP/PCI Clock

This feature allows you to select the combinations of CPU, AGP bus, and

PCI clock frequency. The default setting, Default, will detect your CPU/

AGP/PCI Clock frequency automatically. If you set a unappropriate op-

tion which leads to a booting problem, keep pressing the Insert key until

the display appears will solve it. The options lists all combinations that

provided by the system BIOS.

Содержание 1stMainboard AM37




















































Результаты поиска

Содержание 1stMainboard AM37

Отзывы:

Похожие инструкции для 1stMainboard AM37

Бренды по названию

Популярные бренды

eMachines 1stMainboard AM37, Руководство пользователя

Результаты поиска

Содержание 1stMainboard AM37

Отзывы:

Похожие инструкции для 1stMainboard AM37

Бренды по названию

Популярные бренды