3 - 9
BIOS Setup
Precharge to Active (Trp)
This item allows users to set the clock time from Precharge to Active
command. The options are: 2T, 3T
Active to Precharge (Tras)
This item allows users to set the clock time from Active to Precharge
command. The options are: 5T, 6T
Active to CMD (Trcd)
This item allows users to set the clock time from Active to Read/Write
Delay command. The options are: 2T, 3T
DRAM Burst Length
This item allows users to set DRAM burst length.
The options are: 4, 8.
DRAM Queue Depth
This item allows users to set DRAM queue depth.
The options are: 2 level, 4 level, 3 level.
DRAM Command Rate
This item allows users to set Address Time After command.
The options are: 2T Command, l T Command.
AGP & P2P Bridge Control
AGP Aperture Size
It allows you to select the main memory frame size for AGP use.
The options are: 256M, 128M, 64M, 32M, 16M, 8M, 4M.
AGP Mode
This feature allows users to select the AGP mode when an AGP add-on
card installed. The options are: 4X, 2X, 1X.
AGP Driving Control / AGP Driving Value
These two features allow user to improve the performance of AGP card
manually by pressing Page Down/Page UP key if necessary.
The options of AGP Driving Control are: Auto, Manual.
