3 - 17
BIOS Setup
LPT & COM
When LPT/COM is selected, any access of LPT and COM ports will awake
the system. Likewise, either LPT or COM is chosen, the system will be
awaken by any activity of LPT or COM port.
The options are: LPT/COM, LPT, COM, NONE.
VGA
When set at On, any VGA activity will awake the system.
The options are: OFF, ON.
IRQ/Event Activity Detect
USB Resume From S3
When set at Enabled, it allows USB devices that linked with the system to
activate the system from ACPI S3 power saving mode.
The options are Disabled, Enabled.
State After Power Failure
The item allows you to select the state that your personal computer re-
turns to after a power failure. If set at Off, the system will not boot after a
power failure. If set On, the system will restart after power failure.
The settings are: Auto, On, Off.
Soft-Off by PWR-BTTN
The selection Delay 4 Sec. will allow the system shut down after 4 seconds
after the power button is pressed. The selection Instant-Off will allow the
system shut down immediately once the power button is pressed.
The settings are: Delay 4 Sec, Instant-Off.
MODEM Use IRQ
This feature allows you to select the IRQ# to meet your modem IRQ#.
The options are: NA, 3, 4, 5, 7, 9, 10, 11.
PCI Master
To set this feature at ON activates that Power Management feautre (PM)
wake-up event for the PCI bus master card.
The options are: OFF, ON.
HDD & FDD
When it is set at ON, any access happened at hard drives and floppy
drives will awake the system. The options are: OFF, ON.
