manualshive.com logo in svg

eMachines 1stMainboard AM37, Руководство пользователя, Страница: 42 / 51

Поделиться
Скачать
eMachines 1stMainboard AM37 Скачать руководство пользователя страница 42

3 - 14

AM37 Mainboard Manual

IDE HDD Block Mode

When enabled, the system executes read/write requests to hard disk in

block mode. The options are: Enabled, Disabled.

Onboard Parallel Port

Allows you to select from a given set of parameters if the parallel port uses

the onboard I/O controller.

The options are: Disabled, 378/IRQ7, 278/IRQ5, 3BC/IRQ7.

Parallel Port Mode

Allows you to connect with an advanced printer via the port mode it

supports. The options are: SPP, EPP, ECP, ECP+EPP.

ECP Mode Use DMA

This feature allows you to select Direct Memory Access (DMA) channel if

the ECP mode selected. The options are: 1, 3.

Init Display First

When you install a PCI VGA card on the board, this feature allows you to

select the first initiation of the monitor display from PCI or onboard AGP.

The options are: PCI Slot, AGP.

OnChip USB Controller

Disable this option if you are not using the onboard USB feature.

The options are: All Disabled, All Enabled.

USB Keyboard Support

When a USB keyboard is installed, please set at Enabled.

The options are: Disabled, Enabled.

UR2 Duplex Mode

Allows you to select the IR modes.

The options are: Half, Full.

Onboard Lan Device

This feature allows users to enable or disable the onboard Lan device.

The options are: Enabled, Disabled.

Содержание 1stMainboard AM37




















































Отзывы:

Нет отзывов