EM TEST PFS 200 B1, Руководство по эксплуатации, Страница: 28 / 34

EM TEST PFS 200 Series
Manual for Operation V 3.08 28 / 34
6.2. Trigger
Automatic automatic release of the events
- Repetition rate 0.1 s
– 999 s
0.10 s
–
1.00 s step 0.01 s
1.00 s
–
10.00 s step 0.1 s
10.00 s
– 999.00 s
step 1.0 s
- Drop out duration td
– Dip duration
1.0

s - 9999ms
0.001ms
– 1.00 ms
step 0.001 ms
1.00ms
– 10.00 ms
step 0.01 ms
10.0ms
– 9999 ms
step 0.1 ms
Manual single event trigger
External trigger by external signal
6.3. Measurement
BNC connector CRO I internal current sensor for nominal current, inrush current
10mV / A max. 700A
BNC connector CRO TRIGGER trigger for oscilloscope positive ramp to +15V
delay approx. 30ms
6.4. Test routines
Quick Start All parameters adjustable while test is running
Standard test Routines 1. Chrysler PF 9326
2. Ford
3. PSA / Renault
Service Addresses
Selftest
Set-up
6.5. Interfaces
Serial Interface USB Setting Baudrate (RS232: 9'600 , 19'200 Baud )
Parallel Interface IEEE Addresses 1
– 30
Analogue output 0
– 10V DC to control external voltage sources
6.6. General
Device PFS 200N30,N50,N100 PFS 200N150, N200
Dimensions
19” / 3 HU 19” / 6 HU
Weight N30 / N50: 10.8 kg N100: 14kg approx. 30 kg
Power supply 115/230V +10/-15% 50/60Hz (optional 115 V)
Max. 60 VA
Fuses 2 * 1 A T
6.7. Environmental conditions
Temperature 10 °C to 35 °C
Hunidity 30 % to 70 %; non condensing
Atmospheric pressure 86 kPa (860 mbar) to 106 kPa (1 060 mbar)
=> Not relevant data for the standards can be changed by the manufacturer <=