17
3
2
1
1
2 3
4
5
6
7 8 9
0
ABC DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
+
R
Electronic unit with camera
Wiring for connection of ad-
ditional modules
Manual horizontal and
vertical adjustment
Programming
button
Reset
Wiring for terminal
block connection
Figure1
Figure2
Terminal block
CN1)
Connector for electronic unit.
CN2) Connector for programmer art. 950C or interface
DUW,8RUDUW,
B2)
Bus (cable riser).
B1)
Bus (cable riser).
(;7 ([WHUQDOSRZHUVXSSO\DUW
(;7 ([WHUQDOSRZHUVXSSO\DUW
VLED) LED power supply for additional modules.
X)
Video input (coaxial core) for external camera.
M)
Video input (coaxial sheath) for external camera.
PA)
Input for door open sensor (with reference to ter-
minal M).
CA)
Door open command (with reference to terminal
M).
M) Ground.
S+)
Lock output 12V DC (+) (see note below).
S-)
Lock output 12V DC (-) (see note below).
+12V) 12V (max 120 mA) with current limiter.
-L)
External camera pilot, open collector output.
SR)
Relay-operated lock pilot, open collector output.
F2)
Relay-operated F2 function pilot, open collector
output.
F1)
Relay-operated F1 function pilot, open collector
output.
M) Ground.
B2
B1
EXT+
EXT-
VLED
M
PA
CA
M
S+
S-
+12V
-L
SR
F2
F1
M
X
B2
B1
EXT+
EXT-
VLED
M
PA
CA
M
S+
S-
+12V
-L
SR
F2
F1
M
X
CN2
CN1
CS241
1 250105
¿JXUH
Note: S+/S- outputs. The entrance panel supplies a
current peak of IT> 1A for 10 ms, followed by a holding
current of IM= 200mA for the entire duration of the lock
command (see lock time).
Preliminary procedures
In systems with just one electronic unit, the ID must be MASTER.
If there are several entrance panels in the system, one electronic unit must
be designated as MASTER and the others as SLAVE. These must be allo-
cated an ID identifying them as SLAVE electronic units. Each electronic unit
must have an unambiguous ID number. For allocation of the ID code, refer
to chapter “1.1 Entrance panel ID”. The unit must be programmed using
the buttons of the alphanumeric keypad, with programmer art. 950C or with
LQWHUIDFHDUW,8FRQQHFWHGWRD3&RQZKLFKWKH6DYH3URJVRIWZDUH
is installed.
