70
EN
CCTV
Fig 4-11 record configuration-record bit rate
4.3.3 Time
Step1: Enter into Menu
Æ
Setup
Æ
Record
Æ
Time tab. Refer to Fig
4-12:
Pre-alarm record time:
The record time prior to actual triggering
of an alarm i.e. record time before motion detection alarm was
triggered.
Post-alarm record:
Set the post recording time after the alarm is
finished, five options: 10s, 15s, 20s, 30s, 60s, 120s, 180s and 300s.
Expire time:
The time till which the records would be retained. If
the set date is overdue, the recorded files will be deleted
automatically.
Step2: Select “All” to setup all channels with the same parameters. Fig 4-12 Record Time Setup
Step3: Click “Apply” to save the setting; click “Exit” to exit the current interface.
4.3.4 Video Information
Video Information:
This provides an option to enable or disable the Camera Name and the Time stamp on the video. You can
also choose a position for the stamp on the screen
.
Step1: Enter into Menu
Æ
Setup
Æ
Record
Æ
Stamp interface. Refer to Fig 4-13:
Step2: Checkmark camera name and time stamp; click Setting button. User can use cursor to drag the camera name and time
stamp at random positions. Refer to below Figures:
Step3: Select “All” to setup all channels with the same parameters.
Fig 4-13 Record Stamp Setup Before Drag After Drag
4.3.5
Recycle Record
This option is used to recycle the HDD space once it is full. If enabled, the system will automatically delete the old records
(FIFO*, recycling space) and recycle the space if it is completely utilized. The setting steps are as follows:
Step1: Enter into Menu
Æ
Setup
Æ
Record
Æ
Recycle Record tab.
Step2: Checkmark the ‘recycle record’ box to activate the auto recycling.
Step3: Click “Apply” button to save the setting; click “Exit” button to exit the current interface.
Note
: If the option is disabled or not selected, the DVR would stop recording once the HDD is full.
* FIFO: File Input file output
Parameter
Meaning
Rate
Range from: 1-30
（
NTSC
）
1-25(PAL)
Resolution
Support CIF , HD1, D1
Quality
The higher the value is, the clearer the
recorded image is. Six options: lowest,
lower, low, medium, higher and highest.
Encode
VBR and CBR
Max bit
stream
Range from: 256kbps~2Mpbs
