65
7.1.6 Record Information
In this interface, you can check the resolution, ftp and record status including sensor alarm recording, motion recording, manual recording or schedule re-
cording.
7.1.7 QRCODE
User can quickly access the mobile client by scanning QRCODE. Go to Main Menu
Information
QRCODE tab. Refer to Fig 7-1.
Fig 7-1 Information Configuration
In this interface, you can scan the QRCODE through the mobile phone. Refer to Fig 7-2.
Fig 7-2 Information Configuration
7.2 Manual Alarm
In this interface, user can trigger a manual alarm.
7.3 Disk Management
1. Format the disk
1 - Go to disk management tab.
2 - Click “Refresh” button to refresh the disk information in the list box.
3 - Select a hard disk and click Format button to start format.
Note:
Please format the hard disk before recording. If not formatted, it will show the status of the disk-free space, and total space at the bottom of screen. All
recorded files in the hard disk will be lost once it is formatted.
2. Advanced
You may check model, S/N, firmware, health status of the disk in this interface. You also can monitor the temperature, internal circuit, dielectric material of the
disk, analysis the potential problems of the disk and warn so as to protect its data.
7.4 Upgrade
The NVR can be upgraded by using USB flash drive. Get the upgrading software from your vendor when there is a new software version.
Upgrade Steps:
1 - Copy the upgrade software which gets from vendor into the USB storage device.
2 - Connect the USB flash drive to the USB port.
3 -.Go to Main Menu Upgrade tab. Then the upgrade software name would be displayed in the upgrade list box.
4 - Select that software and then click upgrade button. It will upgrade automatically.
Note:
Please wait for a while when the system reboots. Never cut off power during upgrading. The original configuration will be reserved after upgrade.
7.5 Logoff
Go to Main Menu Logoff tab. A log off dialogue box will pop up. The device will log off by clicking “OK” button. If you want to log in again, click “Main Menu”
icon to go to user name and password to re-login.
EN
