51
5.2 Live Configuration
Live configuration includes three submenus: live, main monitor and mask.
5.2.1 Live
In this interface, you can set up camera name.
To set up camera name:
1 - Go to Main Menu
Setup Live Live. Refer to Fig 5-6.
2 - A software keyboard will pop up by clicking camera name area. Click the letters and (or) digital numbers on the keyboard to input the name you want to
display in live image.
3 - Checkmark the camera name in the show name area.
All channels will show the camera name by checking “All” checkbox.
To set up color:
1 - Click “Setting” button for a particular camera/channel to see a window as below.
2 - In this interface, you can adjust brightness, hue, saturation and contrast in live. Click “OK” button to save the setting.
5.2.2 Main Monitor
The main monitor settings allow you to set camera sequence in live display mode.
Operate the following steps to set main monitor:
1 - Go to Main Menu
Setup Live Main Monitor interface. Refer to Fig 5-7.
2 - Select display mode and channel.
3 - Select dwell time. Click
button to set up the previous channel groups of dwell picture. Click
button to set the latter channel groups of dwell picture.
4 - Click “Apply” to save the setting.
Fig 5-5 Basic Configuration-DST
Fig 5-6 Live Configuration-Live
EN
