GB
75
Adjusting the rinse aid dispenser
The rinse aid dispenser has six
settings. Both the recommended
setting and the default setting is “4”. If
the dishes are not drying properly or
are spotted, adjust the dial to the next
higher number until your dishes are
spot-free.
Reduce the setting if there are sticky
whitish stains on your dishes or a blu-
ish film on glassware or knife blades.
Filling the detergent dispenser
1
Press latch to open
Press the release catch on the deter-
gent dispenser to open the cover.
A B
2
Add detergent into the larger cavity
(A) for the main wash cycle . For
dirtier dishes, you can also add some
detergent into the smaller cavity (B)
for the pre-wash cycle
3
Close the cover and press on it until it
locks into place.
NOTE
:
• It may be necessary to adjust the setting depending
on how dirty the dishes are.
• Please follow the manufacturer’s recommendations
on the detergent packaging.
Adjust lever (Rinse)