WOP-2ac-LR5. User manual
27
•
•
•
•
•
•
•
•
•
•
•
4.5 The 'Radio' menu
In the 'Radio' menu the wireless interface can be configured.
4.5.1 The 'Radio' submenu
In the 'Radio' submenu, the device radio interface's parameters are configured.
Mode
– interface operation mode:
IEEE 802.11a
IEEE 802.11a/n
IEEE 802.11a/n/ac
Channel
– data channel selection;
Channel Bandwidth, MHz
– bandwidth of a channel on which the base station operates. The parameter may
take values of 5, 10, 20, 40 and 80 MHz. Note that channel bandwidth of 80 MHz will operate only according
to 802.11ac standard. If the base station has 5 or 10 MHz bandwidth, select the same bandwidth on the
user station;
Fixed center frequency
– when the flag is checked, all traffic (data and management packets) will be
transmitted at the specified channel center frequency with a given bandwidth (40 or 80 MHz). The function
is proprietary, transmission is not carried out according to IEEE 802.11 standards, where it is supposed to
use different center frequencies for data and management
traffic with 40/80 MHz bandwidth.
Tx Power (dBm)
– Wi-Fi transmitter signal strength adjustment, dBm.
Fixed Transmit Rate
– fixed wireless data transmission rate defined by IEEE 802.11a/n/ac standards;
ACK
Timeout
, µ
s
– waiting time for packet delivery confirmation from the subscriber.
Polling
– when checked, the option is enabled, otherwise – disabled. Polling is an option for TDM access to
the medium (time division). It is characterized by a constant customer survey by the BS
