ELTEX WOP-2ac-LR5, Руководство пользователя

Страница: 18 / 45

WOP-2ac-LR5. User manual
18
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4.4 The «Monitoring» menu
The 'Monitoring' menu displays the current system status.
4.4.1 The 'Wi-Fi Clients' submenu
The 'Wi-Fi clients' submenu displays information about the status of connected Wi-Fi clients.
№ – number of the connected device in the list;
Hostname – network name of the device;
IP address – IP address of the connected device;
MAC address – MAC address of the connected device;
Interface – WOP-2ac-LR5 interface for interaction with the connected device;
Link Capacity – parameter that reflects the efficiency of modulation on the transmission used by an access
point. It is calculated based on the number of packets transmitted to the client on each modulation, and the
reduction factors. The maximum value is 100% (means that all packets are transmitted to the client at
maximum modulation for the maximum nss type supported by the client). The minimum value is 2% (in the
case when the packets are transmitted on the modulation nss1mcs0 for a client with MIMO 3x3 support).
The parameter value is calculated for the last 10 s;
Link Quality – parameter that displays the status of the link to the client, calculated based on the number of
retransmit packets sent to the client. The maximum value is 100% (all transmitted packets were sent on the
first attempt), the minimum value is 0% (no packets were successfully sent to the client). The parameter
value is calculated for the last 10 s;
Link Quality Common – parameter that displays the status of the link to the client, calculated based on the
number of retransmitted packets sent to the client. The maximum value is 100% (all transmitted packets
were sent on the first attempt), the minimum value is 0% (no packets were successfully sent to the client).
The parameter value is calculated for all the time the client is connected;
RSSI – received signal level, dBm;
SNR – signal/noise ratio, dB;
TxRate – channel data rate of transmission, Mbps;
RxRate – channel data rate of receiving, Mbps;
TxBW – transmission bandwidth, MHz;
RxBW – receive bandwidth, MHz;
Uptime – Wi-Fi client connection time;
Total TX / RX, bytes – the number of bytes sent/received on the connected device;
Total TX / RX, packets – the number of packets sent/received on the connected device;
Data TX / RX, bytes – the number of data bytes sent/received on the connected device;