___________________________________________________________________________________
___________________________________________________________________________________________
RG-5400 Subscriber router
89
To map a specific cadence to 'Alert-Info' header value in the incoming 'Invite', you should select the
'Process Alert-Info header'
checkbox in the respective SIP profile, and define the signal name in 'Signal name'
field in cadence settings (e.g. Example-cadence). When 'Alert-Info' header value in the incoming 'Invite' is
<http://127.0.0.1/Example-cadence>, cadence will be output into the line.
If the cadence is not found by the 'Alert-Info' header, attempt to find the cadence by the caller number
will be taken. If the latter is absent, the standard call signal with the cadence '1000,4000' will be output.
To edit the specific signal, click the respective link in the
'Cadence name'
column.
To add a signal, click 'Add' button and enter the following settings:
–
Cadence name—
name of the signal;
–
Cadence
—duration of the call voltage application to the phone unit, both values should be
divisible by 100ms, minimum value is 200ms, maximum is 8,000ms;
To apply a new configuration and store settings into the non-volatile memory, click
'Apply'
button.To
discard changes, click
'Cancel'
button
.
3.7.3.7
‘Call history’ submenu
In the call history submenu, you may configure call history logging.
