___________________________________________________________________________________
___________________________________________________________________________________
112 RG-5400 Subscriber router
–
Enable management interface
– when checked, the device management can be
performed in dedicated VLAN numer of which is specified in ‘VLAN ID’ field
;
–
802.1P
—802.1P marker (another name:
CoS – Class of Service
), assigned to the outgoing
IP packets from this interface. It may take values from 0 (the lowest priority) to 7 (the
highest priority);
–
Protocol
—select address assigning protocol for the interface:
Static
—operation mode where IP address and all the necessary settings for WAN
interface are assigned manually. When 'Static' type is selected, the following parameters
will be available for editing:
–
IP address—
specify the IP address for the management interface;
–
Netmask—
subnet mask for the management interface;
–
Default gateway
—default gateway IP address for the management interface;
–
1st DNS-server, 2nd DNS-server
—DNS server IP addresses required for the
gateway autoconfiguration protocols' operation; to configure protocols, use
System
—
Autoconfiguration
page.
DHCP—operation mode where IP address, subnet mask, DNS address and other
necessary settings for the interface operation (e.g. static routes) are automatically
obtained from DHCP server. If you are unable to obtain DNS server addresses from the
provider, you may specify them manually using 'Primary DNS' and 'Secondary DNS' fields.
Manually defined addresses will have a priority over DNS addresses obtained via DHCP.
For DHCP, you may specify the required value for Option 60.
–
Alternative Vendor ID (Option 60)—
when selected, the device transmits
Vendor
ID (Option 60)
field value in Option 60 DHCP messages (Vendor class ID)
.
If the
field is empty, Option 60 will not be transmitted in DHCP messages.
If the
Alternative Vendor ID (Option 60)
checkbox is not selected, the default
value will be transmitted in Option 60 in the following format:
[VENDOR:
device vendor
][DEVICE:
device type
][HW:
hardware version
] [SN:
serial number
][WAN:
WAN interface
МАС address
][LAN:
LAN interface MAC
address
][VERSION:
firmware version
]
Example:
[VENDOR:Eltex][DEVICE:RG-5421G-Wac][HW:1.2][SN:VI23000118]
[WAN:A8:F9:4B:03:2A:D0][LAN:02:20:80:a8:f9:4b][VERSION:#2.1.0]
