___________________________________________________________________________________
___________________________________________________________________________________________
RG-5400 Subscriber router
61
3.7.2.14
‘Static Routes’ submenu
In the 'Routing' submenu, you may configure device static routes.
Routing
To add a new route, click
'Add'
button and fill in the following fields:
–
Name
– route name, used for human perception convenience;
–
Destination address
– IP address of host or subnet that the router sould be established to;
–
Netmask
– subnet mask. Subnet mask for host should be 255.255.255.255, for subnet—
depending on its size;
–
Gateway
– gateway IP address that allows for the access to the
'Destination IP'
.
RIP
To enable RIP, you should activate ‘Enable RIP’ parameter. The following parameters will be available for
each active interface:
