___________________________________________________________________________________
___________________________________________________________________________________________
RG-5400 Subscriber router
33
For DHCP, you may specify the required value for Option 60.
–
Alternative Vendor ID (Option 60) –
when checked, the device transmits
Vendor
ID (Option 60)
field value by Option 60 DHCP messages (Vendor class ID)
.
If the
field is empty, Option 60 will not be transmitted in DHCP messages.
If the
Alternative Vendor ID (Option 60)
checkbox is not selected, the default
value will be transmitted in Option 60 in the following format:
[VENDOR:
vendor
][DEVICE:
the device type
][HW:
hardware version
] [SN:
serial
number
][WAN:
WAN interface MAC address
][LAN:
LAN interface MAC
address
][VERSION:
firmware version
]
Example:
[VENDOR:Eltex][DEVICE:RG-5421G-Wac][HW:1.2][SN:VI23000118]
[WAN:A8:F9:4B:03:2A:D0][LAN:02:20:80:a8:f9:4b][VERSION:#2.1.0]
–
Primary DNS, Secondary DNS –
IP address of DNS server – if DNS addresses are
not obtained automatically via DHCP, you should define them manually.
Manually defined addresses will have a priority over DNS addresses obtained via
DHCP.
PPPoE
– operation mode when PPP session is established on WAN interface. When
‘PPoE’ is selected, the following parameters will be available for editing:
–
Username
– username for authorization on PPP server;
–
Password
– password for authorization;
–
Connection type –
in accordance with a selected value of a PPP-session:
AlwaysOn; OnDemand (session is initialized when traffic transmission is
required); Manual (manual session activation);
–
Inactivity Timeout, sec
– time interval after which PPP-session will be broken
when the PPP-session becomes inactive in the OnDemand mode;
–
LCP
-
echo
amount
– amount of the unreplied LCP-requests after which PPP
session will be broken;
–
Period of LCP
-
echo transmission, sec
– period for LCP-echo transmission;
–
MTU
– maximum block size for data transmitted via the network (1492 is
recommended);
–
Service-Name
– ‘Service-Name’ tag value in PADI message (this field is optional);
–
Second access
– type of access to local area network resources.
You may select two options:
DHCP – dynamic access when IP address and other required parameters are
obtained via DHCP;
Static – in this case, you should specify access settings manually
IP address
,
Subnet mask, DNS server;
–
Hardware traffic acceleration
– increase device bandwidth for PPP traffic (if
PPP
is selected) or IPoE traffic (if
Ethernet
is selected) transmission depending on the
selected value.
PPTP –
operation mode when the Internet access is established via a special channel—a
tunnel—using PPTP. When
'PPTP'
is selected, the following parameters will be available
for editing:
–
PPTP server
– IP address of PPTP server;
–
User name
– username for authorization on PPTP server;
–
Password
– password for authorization on PPTP server;
–
Connection type –
in accordance with a selected value of a PPP-session:
AlwaysOn; OnDemand (session is initialized when traffic transmission is
required); Manual (manual session activation);
