ELTEX RG-5421G-Wac, Руководство пользователя

Страница: 59 / 147

___________________________________________________________________________________
___________________________________________________________________________________________
RG-5400 Subscriber router 59
–
Enable Wi-Fi – activate this VAP;
–
SSID parameters, mode, security mode, guest Wi-Fi, use VLAN and maximum number of clients
are similar to parameters of the key access point.
To apply new configuration and store settings into non-voletile memory, click ‘Apply’ button. To discard
changes, click ‘Cancel’ button .
If the device operates in two frequency ranges (‘Wi-Fi 2.4 GHz’ and ‘Wi-Fi 5 GHz’ are enabled
simuilteniously) – max data transmission rate for each frequency range will be reduced as a result of MIMO
technology disabling.
To apply new configuration and store settings into non-voletile memory, click ‘Apply’ button. To discard
changes, click ‘Cancel’ button .
3.7.2.12 ‘MAC filter’ submenu
In the 'MAC filter' submenu, you may configure access filtering and Internet access by MAC address.
Access restriction settings
–
Mode of wired network filter — defines policy of access to the device via WAN and LAN
interfaces;
–
Wi-Fi 2.4/5 GHz filter mode – determines one from three filter operation algorithm in
dependence on client’s MAC address:

Disable – filtration by MAC addresses is disabled – all clients may connect to access
point;

Black list – in this filter operation mode, clients with MAC addresses from the 'MAC
address list' are denied to connect to the access point (AP). Subscribers with unlisted
MAC addresses are allowed to connect to the AP;

White list – in this filter operation mode, clients with MAC addresses from the 'MAC
address list' are allowed to connect to the access point. Subscribers with unlisted MAC
addresses are denied to connect to the AP.
MAC Address List
MAC address list is assigned to wired interface and eash frequency range independently. You may enter
up to 30 client MAC addresses which may access the device in accordance to the specified filtering mode.
To add a new client to the list, click 'Add' button and enter its MAC address or select MAC address of
host connected to a wireless network.