background image

12 

General

 

 

 

 

We reserve the right to make technical changes within the scope of 
improving usability and further development. 

1.6 Copyright protection 

This manual is copyright-protected and is intended for internal use 
only. A transfer of this manual to third parties, a reproduction of any 
kind, whether partially or fully, and the use and/or disclosure of its 
content, are not permitted without written consent from the 
manufacturer, except for internal purposes. Contraventions to this 
provision shall result in damage compensation. We reserve the right 
to assert further claims. 
 

1.7 Scope of delivery 

The scope of delivery for the DL230 includes: 

 

Data Logger DL230 

 

Dispatch list 

 

Design data sheet 

 

Manual 

 

Bag of accessories 

1.8 Spare parts and accessories 

 

 

 

 

WARNING! 
Incorrect use of spare parts and accessories may 
present a risk to safety! 

False or incorrect use of spare parts and accessories 
may impair safety and lead to damage, malfunctions, 
or total failures. 
Therefore: 
–  Only use original spare parts and accessories 

produced by the manufacturer. 

–  The manufacturer should always be contacted in 

the event of uncertainty. 

 

 

 

Содержание DL230















































































































Отзывы: