elsner elektronik KNX TH-UP basic, Установка и настройка

Страница: 32 / 48

31
……………………………
Target value setpoint per Parameter • Communication object
If the target value is set per Parameter:
Target value setpoint per
Parameter
Target value in % 0 … 100
Dead zone between humidification and
dehumidification in %
(only if type of control is a humidifacation and
dehumidification)
Humidification starts with
rel. humidity
O
target value - dead zone
0 … 100
If the target value is set per communication object:
Target value setpoint per
Communication object
The value communicated last shall be
maintained
• not
• after restoration of voltage
• after restoration of voltage and programming
(Do not use for first commissioning)
Start target value in %
valid until 1.communication
(only if the value communicated last is “not”
maintained or “after restoration of voltage”)
0 … 100
Type of the target value change • Absolute value
• Increment/decrement
Step size
(only with “Increment/decrement”)
0.1°C • 0.2°C • 0.3°C • 0.4°C • 0.5°C • 1°C • 2°C •
3°C • 4°C • 5°C