elsner elektronik KNX TH-UP basic, Установка и настройка

Страница: 27 / 48

26
Humidity measured value
Humidity offset in % RH -10 … 10
Use external measured value for humidity No • Yes
If no external measured value is used:
Use external measured value for humidity
No
Humidity measured value • do not send
• send periodically
• send in case of change
• send in case of change and periodically
From change of
(only if sending “in case of change”)
2% • 5% • 10% • 25% • 50%
Send periodically all
(only if sending “periodically”) 5 s • 10 s • 30 s • 1 min • … • 2 h
Use min. and max. humidity values
(Values are not maintained after reset) No • Yes
If an external measured value is used:
Use external measured value for humidity
Yes
Ext. humidity measured value proprotion
of the total measured value 5% … 100% (in steps of 5%)