elsner elektronik 70391, Установка и настройка

Страница: 10 / 18

8 Parameter setting
Door operator control module KNX A3-B2 • Status: 17.12.2019 • Technical changes and errors reserved.
5. Parameter setting
The parameter defaults are underlined.
5.1. General settings
Set themaximum telegram rate:
5.2. Door operator
You define the operating mode for the outputs in the Door operation menu.
If only one door is connected to the three outputs (two- or three-button operation,
output 1 = open, output 2 = close, if needed output 3 = stop), select
Defined Open/
Close/Stop mode or Impulse mode.
If a door is connected to each output (single-button operation), select Impulse mode or
dead-man mode.
Defined Open/Closed: (1 door)
The outputs 1 and 2 react to the object (are assigned to the object) Output 1+2 -
Impulse . If the object value is 1, then output 1 receives an impulse (closes for 1s). If the
object value is 0, then output 2 receives an impulse (closes for 1 s).
Output 3 is asigned to the object Output 3 - Impulse . The output reacts as soon as an
object has been received (no matter which value).
Select whether output 3 is a normally closed or normally open contact (duration of
opening/closing 1 second).
22 Input 2 Relative Dimming Input/Output 3.007 1 RWCT
23 Input 2 Encoder 8 bit Output 5.* 1 R CT
24 Input 2 Encoder Temperature Output 9.001 2 R CT
25 Input 2 Encoder Brightness Output 9.004 2 R CT
26 Input 2 Scene Output 18.001 1 R CT
27 Software version Readable 217.001 2 R C
Maximum message rate 1 • 2 • 5 • 10 • 20 messages per second
Operating mode • Defined Open/Close/Stop
• Impulse mode
• Dead-man mode
Operating mode Defined Open/Closed/Stop
Allows control of one door
No. Text Function DPT Length
(byte) Flags