elsner elektronik 70391, Установка и настройка

Страница: 12 / 18

10 Parameter setting
Door operator control module KNX A3-B2 • Status: 17.12.2019 • Technical changes and errors reserved.
5.3. Input 1 / 2
You define the function of the two inputs in the "Input 1" or "Input 2" menu. The inputs
are independent of the outputs.
Input as switch:
If a button with switch function is assigned to the input, select the bus function
"Switch" and specify which value is sent when pressing/releasing the button and when
it will be sent.
Operating mode Dead-man mode
Allows control of one or two doors
When receiving "Output 1 - Impulse" when
object value = 1 Output 1 closed
When receiving "Output 1 - Impulse" when
object value = 0 Output 1 open
When receiving "Output 2 - Impulse" when
object value = 1 Output 2 closed
When receiving "Output 2 - Impulse" when
object value = 0 Output 2 open
Monitoring the control objects
use no • yes
Monitoring period for objects in seconds 1...60; 2
Bus function • Switch
• Changeover switch
• Blind
• Roller blind
• Awning
• Window
• Dimmer
• 8-bit encoder
• Temperature encoder
• Brightness encoder
• Scenes
Function Switch
Command when pressing the button • send 0
• send 1
• do not send telegram
Command when releasing the button • send 0
• send 1
• do not send telegram