7
Display and operation at the device
Temperature sensor KNX T-B-UP
• Software version 3.1 and higher
Status: 21/03/2016 • Technical changes and errors excepted.
The following display options are available:
Symbols
Comfort mode.
Comfort (present) target temper-
ature will be used.
Standby mode.
Standby (absent during day) tar-
get temperature will be used.
Fig. 3
Mode display with current target value and/or base tar-
get value
Fig. 4
Mode display with scale display for adjusting the base
target value.
The control position in the image reads "Base target val-
ue reduced".
Fig. 5
Mode display with scale display and number.
Shows the set target value change.
The control position in the image reads "Base target val-
ue reduced to 1.0°".
Fig. 6
Mode display with scale display and range.
Shows the possible adjustment range (as set in the ETS).
The control position in the image reads "Base target val-
ue reduced".
Fig. 7
Mode display with scale display, range and number.
Displays the possible adjustment range (as set in the
ETS) and the set target value change.
The control position in the image reads "Base target val-
ue reduced to 1.0°".
