5
Installation and start-up
Temperature sensor KNX T-B-UP
• Software version 3.1 and higher
Status: 21/03/2016 • Technical changes and errors excepted.
The sensor may be installed and operated in dry interior rooms
only. Avoid condensation.
When selecting an installation location, please ensure that the measurement results
are affected as little as possible by external influences. Possible sources of interference
include:
•
Direct sunlight
•
Drafts from windows and doors
•
When mounted in-wall: Draft from ducts which lead from other rooms to the
junction box in which the sensor is mounted
•
Warming or cooling of the building structure on which the sensor is mounted,
e.g. due to sunlight, heating or cold water pipes
•
Connection lines which lead from warmer or colder areas to the sensor
Temperature variations from such sources of interference must be corrected in the ETS
in order to ensure the specified accuracy of the sensor (temperature offset).
2.3. Construction of the sensor
2.3.1. Housing
Fig. 1
1 Baseplate
2
Catches
3
Openings for air circulation
4
Key
5 Programming LED (recessed)
6
Programming button
(recessed) for teaching the
device
7
Key
8
Openings for air circulation
3
2
4
6
7
5
8
1
