SO250-UI Tank Sensor | Version 18.08.2015 | Data subject to alteration. Errors subject to correction.
3
Housing:
Plastic
Colour:
Black
Protection category:
IP 52
Chemical resistance:
Water, heating oil
Dimensions:
Overall diameter approx. 60 mm,
overall sensor head height approx. 45 mm,
thread 1½ inches
Connector cable:
RG 58 coaxial cable with BNC plug
10 m length, can be extended to max. 40 m
Total weight:
approx. 400 g
Ambient temperature:
+0…+40 °C
Measurement range:
12…250 cm
Installation and commissioning
Installation, testing, operational start-up and troubleshooting
should only be performed by an electrician.
DANGER!
Risk to life from live voltage (mains voltage)!
There are unprotected live components within the device.
• National legal regulations are to be followed.
• Ensure that all lines to be assembled are free of voltage and take precautions against
accidental switching on.
• Do not use the device if it is damaged.
• Take the device or system out of service and secure it against unintentional use, if it
can be assumed, that risk-free operation is no longer guaranteed.
The device is only to be used for its intended purpose. Any improper modification or
failure to follow the operating instructions voids any and all warranty and guarantee
claims.
After unpacking the device, check it immediately for possible mechanical damage. If it
has been damaged in transport, inform the supplier immediately.
The device may only be used as a fixed-site installation; that means only when
assembled and after conclusion of all installation and operational start-up tasks and
only in the surroundings designated for it.
Elsner Elektronik is not liable for any changes in norms and standards which may occur
after publication of these operating instructions.
