SO250-UI Tank Sensor | Version 18.08.2015 | Data subject to alteration. Errors subject to correction.
13
Modbus settings
The following settings can be applied to the Modbus interface:
•
Modbus switch on/off settings
•
Modbus address settings
•
Data transmission rate settings
•
Parity check settings
Move the cursor to the "Modbus settings" menu item
using the
or
keys. Confirm your selection using
the key.
Move the cursor to the desired setting using the or
keys. Confirm your selection using the key.
Selecting “Switch off” returns the SO250-UI automatically to the basic settings.
Selecting “Switch on” brings you to the next Setting step:
Use the
and keys to change the address (1 to
247). Confirm your selection using the key.
Use the and
keys to set the desired data
transmission rate.
Settings options: 4.8 kbit/s • 9.6 kbit/s • 19.2 kbit/s • 38.4 kbit/s • 115 kbit/s.
Confirm your selection using the key.
Use the
and keys to set the desired data parity
check (even/odd parity). Confirm your selection using
the key.
You will automatically return to the main menu.
Current output
Move the cursor to the "Current output" menu item
using the
or
keys. Confirm your selection using
the key
.
Modbus settings
>™
Current output
>
Voltage output
>
Relay settings
>
Parity check:
Even Parity™
Modbus settings
>
Current output
>™
Voltage output
>
Relay settings
>
Communication via
Modbus
switch on
>™
switch off
>
Address in
Modbus system:
1™
Data transmission
rate:
19.2 kbit/s™
