SO250-UI Tank Sensor | Version 18.08.2015 | Data subject to alteration. Errors subject to correction.
9
Main menu:
or
Press the key once to access the “Settings” area.
Move the cursor (the blinking rectangle on the right)
to the ”Distance measurement” menu item using the
and keys, and press the key.
Move the cursor to the desired setting using the or
keys. You can display distances in millimetres
(mm), centimetres (cm) or metres (m). Confirm your
selection using the key.
Use the
and
keys to set the desired time interval
for your measurements.
Settings options: From 1 s to 9 s in one-second increments, from 10 s to 50 s in ten-
second increments, from 1 min to 120 min in 10-minute increments.
Confirm your selection using the key. You will automatically return to the basic
settings.
Content measurement
The SO250-UI Tank Sensor can measure a tank's liquid contents. Possible tank shapes
include rectangular, spherical and upright or horizontal cylindrical tanks. Where two or
more tanks of the same type are laid out in a battery, only one tank need be described
to allow the SO250-UI to calculate the content based on the input number of tanks. The
following settings can be applied in the “Content measurement” menu:
•
Tank form
•
Tank volume / capacity / filling height
•
Sensor distance from liquid when tank is full
•
Number of tanks in battery
•
Content display unit
•
Measurement time interval
SO250-UI Tank Sensor
Tank content:
4885 litres
Settings >
SO250-UI Tank Sensor
Distance: 59.4cm
Settings >
Distance measurem >™
Content measurem >
Interfaces >
Acoustic signal
>
Display in mm
>™
Display in cm
>
Display in m
>
Measurement
frequency?
Once every 8 secs.™
