![background image](http://html.mh-extra.com/html/elsner-elektronik/3090/3090_installation-and-adjustment_2396720030.webp)
28
Setting of parameters
Weather Station Suntracer KNX-GPS light
• Version: 30.09.2020 • Technical changes reserved. Errors reserved.
If the threshold is set by a communication object:
If the threshold is set by communication objects, a threshold which is valid until the
first communication of a new threshold must be determined for the initial operation.
The threshold value communicated last can be used if the weather station is already in
operation.
From the 1st communication onwards, the threshold value corresponds to the value of
the communication object and is not multiplied by the factor 0.1.
If the threshold is set by communication object with saving of the last value:
As soon as a threshold has been set by means of a parameter or by means of a com-
munication object, the threshold set at last remains until a new threshold has been
transmitted by a communication object.
The thresholds set at last by communication objects are saved in EEPROM in order to
maintain them in case of voltage breakdown and to provide them as soon as there is
voltage supply again.
7.5. Wind force
Threshold value is set by
Communication object
Threshold value in 0.1°C
valid until 1st communication
-300 … 800; 200
Threshold value is set by
Com. object with saving of the last
value
Hysteresis of the threshold value in 0.1°C.
0 …100; 30
Activation delay
none • 1 s • 1 min... • 2 h
Switch-off delay
none • 1 s • 1 min... • 2 h
Output switches at
• TV above = ON TV-Hyst. below = OFF
• TV below = ON TV-Hyst. above = OFF
Communication object switching output
temperature threshold value 1 / 2 / 3 / 4
• do not send
• send in case of change
• send inverted in case of change
• send in case of change and periodically
• send inverted in case of change and peri-
odically
Measured value
• not send
• send cyclically
• send in case of change
• send in case of change and cyclically
From a wind force change of
1 m/s … • 4 m/s
Send and reset of the min. and max.
wind force value on request
do not release • release
Threshold value 1 / 2 / 3 / 4
not active • active
Содержание 3090
Страница 2: ......