![background image](http://html.mh-extra.com/html/elsner-elektronik/3090/3090_installation-and-adjustment_2396720014.webp)
12
Installation and commissioning
Weather Station Suntracer KNX-GPS light
• Version: 30.09.2020 • Technical changes reserved. Errors reserved.
230 V AC version
2.1.8. Mounting the weather station
Close the housing by putting the cover back over the bottom part. The cover must snap
in on the left and right with a definite “click”.
2
3
4
5
6
Fig. 14
1
Slot for cable connection to the rain sensor in the housing cover
2
Tension clamp for power supply (230 V AC). For massive conductors of up to
1.5 mm² or conductors with fine wires.
3
KNX clamp +/-
4
Control LED GPS reception. Depending on the parameter setting in the ETS, the
LED blinks 1x per second to show GPS reception or it stays “always off”. After the
auxiliary supply voltage has been connected, it may take some minutes before
reception is established.
5
Programming pushbutton for the teach-in of the device
6
Programming LED
1
Содержание 3090
Страница 2: ......