elsner elektronik 3090, Установка и настройка

Страница: 8 / 40

6 Installation and commissioning
Weather Station Suntracer KNX-GPS light • Version: 30.09.2020 • Technical changes reserved. Errors reserved.
At least 60 cm of clearance must be left all round the weather station. This facilitates
correct wind speed measurement without eddies. The distance concurrently prevents
spray (raindrops hitting the device) or snow (snow penetration) from impairing the
measurement. It also does not allow birds to bite it.
The mounting position must be selected so that the sensors for rain and wind cannot
be touched by persons.
Please take note that an extended awning does not shade the device from sun and
wind.
Temperature measurements can also be affected by external influences such as by
warming or cooling of the building structure on which the sensor is mounted, (sun-
light, heating or cold water pipes). Temperature variations from such sources of inter-
ference must be corrected in the ETS in order to ensure the specified accuracy of the
sensor (temperature offset).
Magnetic fields, transmitters and interfering fields from electricity consumers (e.g. flu-
orescent lamps, neon signs, switched-mode power supplies etc.) can interfere with or
even cut out reception of the GPS signal.
Fig. 1
There must be at least 60 cm of space below,
to the sides and in front of the weather station
left from other elements (structures, con-
struction parts, etc.).
60 cm
Fig. 2
The weather station must be mounted on a
vertical wall (or a pole).
Wall
or
pole