Introduction
MicroLink ISDN/PCC-16
Manual © 1997 ELSA GmbH
5
1 Introduction
About this manual
This manual describes the installation, the features and the operation of the
MicroLink ISDN/PCC-16
ISDN adapter board.
Symbols and
conventions
Symbols and icons are used throughout this manual to highlight pertinent
sections of text:
◊
NOTE
◊
denotes important information
A list of items is indicated by bullet symbols:
n
...
Procedures consist of numbered steps:
1. ...
<CR>
(Carriage Return) means that the Return or Enter key should be pressed
S
0
interface
In this manual, the interface between the ISDN Network Terminator (NT) and
S/T interface
the terminal devices is generally referred to as "S
0
interface" or "S
0
bus". In
other countries other names may be common, such as "S/T interface"
which is commonly used in the USA.
Changes to this
manual
ELSA
MicroLink
®
products are subject to continual development. Thus it is
possible that the printed documentation does not correspond to the latest
release. You will always, however, find the latest information on the
ELSA
ONLINE
Support BBS. See page 42 for contact numbers.
Package contents
Before you start installing your ELSA
MicroLink
®
ISDN adapter board, please
make sure that your package is complete:
n
MicroLink
ISDN adapter board
n
ISDN line connection cable
n
Printed manuals
n
MicroLink
CD
n
Proof of license (yellow label)
◊
NOTE
◊
If any item is missing or damaged, please contact your dealer. ELSA reserves
the right to make changes to the package contents without prior notice.
